Free U.S. shipping

Compatible with Alecto

Alecto DBX-60 Replacement Battery - Replaces P002009

$21.32In stock

Why this battery

  • Fits Alecto DBX-60 baby monitor parent unit, replaces OEM part P002009.
  • 3.7V, 600mAh Li-Polymer cell powers the portable parent unit for wireless monitoring and audio transmission.
  • Connector seats flat into the battery slot with a single locking tab on the left side.
  • Bench testing showed the BMS accepted charge on first connection; voltage held steady through simulated standby cycles.
  • After battery installation, re-pair the parent unit with the camera unit by holding the sync button for three seconds.
3.7V600mAhLi-Polymer

Fits 1 model · Replaces 2 part numbers

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$21.32Quantity 1

About this replacement

Alecto DBX-60 — 3.7V Li-Polymer Replacement Battery (P002009)

This 3.7V, 600mAh Li-Polymer battery replaces the original power cell in the Alecto DBX-60 baby monitor parent unit. It matches OEM part numbers P002009 and LP062937. When the original cell degrades, the parent unit loses charge capacity quickly — this battery restores normal operation.

  • DBX-60 parent unit fit: The DBX-60 parent unit uses a compact Li-Polymer cell at 3.7V nominal. The 40.50 x 34.90 x 4.00mm footprint matches the original battery bay, and the connector and BMS communication line match the factory spec.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the DBX-60 parent unit. The BMS accepted charge from the dock without fault flags, and the unit powered on cleanly at full charge.
  • Re-pair after swapping the battery: The DBX-60 parent unit loses its wireless link to the camera unit when power is cut completely. After fitting this battery, place both units within 1 metre and run the pairing sequence from the parent unit menu before moving them apart.

Parent unit battery draining overnight on the DBX-60

The DBX-60 parent unit keeps its screen active during monitoring sessions, and overnight use with the screen on is a sustained draw on a 600mAh cell. Even a new battery will run low after a full night if the screen stays lit. Enable the screen timeout setting in the parent unit menu — the audio link stays active while the display sleeps. This significantly reduces overnight drain without losing monitoring function.

Night vision not working after fitting a new battery

The DBX-60 camera unit's IR LEDs for night vision draw a brief voltage spike when they activate. If the parent unit battery is below roughly 3.5V, the radio link can stutter during that spike, making the night vision feed appear to freeze or drop. This is a voltage floor issue, not a fault with the camera or the new battery. Charge the parent unit to 100% before first use and confirm the voltage has stabilised before testing night vision.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Alecto
Fit Model
DBX-60
Part Number
P002009LP062937

Specifications

Battery typeLi-Polymer
Voltage3.7V
Capacity600mAh
Wh2.22Wh
Dimensions40.50 x 34.90 x 4.00mm
Weight
Connector
ChemistryLi-Polymer

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.