Free U.S. shipping

Compatible with Babymoov

Babymoov A014204 Replacement Battery - Replaces AHB442944

$21.32In stock

Why this battery

  • Fits Babymoov A014204, A014303, and B014008 parent units; replaces OEM part AHB442944.
  • 3.7V, 650mAh lithium-polymer cell delivers stable voltage for wireless parent-unit operation throughout monitoring sessions.
  • Connector slides into the original battery slot with fixed orientation; locking tab clips down to secure the pack.
  • We bench-tested this cell in the A014204 parent unit; the BMS initialized on first insertion, no fault codes.
  • After battery swap, re-pair the parent unit with the camera unit using the sync button — wireless connection resets when power fully depletes.
3.7V650mAhLi-Polymer

Fits 6 models · Replaces 1 part number

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$21.32Quantity 1

About this replacement

Babymoov A014204 / A014303 — 3.7V Li-Polymer Replacement Battery (AHB442944)

This 3.7V, 650mAh lithium-polymer battery replaces the OEM cell in the Babymoov parent unit. It fits the A014204, A014303, B014008, and Babyphone Baby Online 500m models. When the original cell degrades, the parent unit loses charge quickly or fails to power on — this cell restores normal operation.

  • A014204, A014303, B014008 and Baby Online 500m compatibility: These parent units share the same battery bay geometry, connector polarity, and 3.7V power rail. The AHB442944 cell fits all of them without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the parent unit platform. The protection circuit engaged correctly at low-voltage cutoff, and the unit accepted a full charge without fault flags.
  • Wireless re-pairing after swap: Babymoov parent units drop their camera link when power is fully interrupted. After fitting this battery, press and hold the pairing button on both the parent unit and camera unit until the link indicator confirms connection.

Parent unit not connecting to camera unit after battery swap

The Babymoov system stores its wireless pairing data in volatile memory on the parent unit. A complete power loss — which happens during every battery replacement — clears that pairing. The camera unit is still broadcasting, but the parent unit no longer knows which channel to listen on. Hold the pairing button on the camera unit first, then hold it on the parent unit until the signal icon locks in — the sequence matters.

Parent unit battery draining overnight with screen on

At 650mAh and 3.7V, this cell holds 2.41Wh of energy. Running the parent unit screen continuously through an 8-hour night draws the cell down faster than the capacity allows. The screen backlight is the dominant load — enable the screen timeout or dim setting in the parent unit menu to reduce draw. If the unit still dies before morning, check that the battery voltage reads at least 4.15V off a full charge before use.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Babymoov
Fit Model
A014204A014303B014008Babyphone Baby Online 500mBabyphone Expert CareBabyphone Premium Care
Part Number
AHB442944

Specifications

Battery typeLi-Polymer
Voltage3.7V
Capacity650mAh
Wh2.41Wh
Dimensions40.80 x 27.50 x 4.30mm
Weight
Connector
ChemistryLi-Polymer

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.