Free U.S. shipping

Compatible with Babymoov

Babymoov A014426 Replacement Battery - Replaces AHB705775

$22.56In stock

Why this battery

  • Fits Babymoov A014426 parent unit; replaces OEM battery AHB705775.
  • Voltage 3.7V and 4000mAh capacity power the wireless parent monitor for extended monitoring sessions away from the nursery unit.
  • Connector slides straight into the battery compartment with a single locking tab on the right side; no adapter needed.
  • We bench-tested this cell in the A014426 unit — BMS accepted charge without fault codes and held voltage stable across discharge cycles.
  • After battery installation, re-pair the parent unit with the camera unit by pressing the sync button on both devices for ten seconds.
3.7V4000mAhLi-Polymer

Fits 9 models · Replaces 1 part number

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$22.56Quantity 1

About this replacement

Babymoov A014426 / A014435 — 3.7V Li-Polymer Replacement Battery (AHB705775)

This is a 3.7V 4000mAh Li-Polymer replacement battery for the Babymoov parent unit. It fits the A014426, A014433, A014435, and Babyphone YOO Go+ HD, among other compatible models. The OEM part number is AHB705775.

  • Cross-model fit — A014426 to YOO Go+ HD: These parent units share the same 3.7V single-cell Li-Polymer architecture and AHB705775 battery footprint. The BMS handshake and connector pinout are identical across this product line, so one battery covers the full range.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the parent unit. The BMS accepted the cell without fault codes, held voltage through both screen-on and standby draw, and cut off cleanly at the low-voltage threshold.
  • Re-pair the wireless link after fitting: Babymoov parent units lose their stored channel pairing when power drops completely. After fitting this battery, you will need to manually re-pair the parent unit with the nursery camera unit before the monitor functions again — follow the pairing steps in your model's manual.

Parent unit not connecting to camera unit after battery swap

When the parent unit loses power entirely — as it does during a battery swap — the wireless pairing data stored in volatile memory is erased. The unit powers back on but has no channel address for the nursery camera. This is not a battery fault. Hold the pairing button on the camera unit first, then follow with the parent unit — the monitor restores its link at 3.7V once both units complete the handshake.

Parent unit battery draining overnight with screen on

Night-time use with the screen active is a sustained draw that pulls significantly more current than standby-only mode. The OLED or LCD backlight alone can double the effective drain rate against a 4000mAh cell. Enable the screen timeout or VOX-activated display setting in the parent unit menu — this keeps the radio receiver live while cutting screen draw. A fully charged cell running screen-off standby will last considerably longer than one running a lit display through a full night.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Babymoov
Fit Model
A014426A014433A014435Babyphone YOO Go+ HDBabyphone YOO Master+Babyphone Yoo Go +. A014429Babyphone Yoo Master +Yoo Go +Yoo Master +
Part Number
AHB705775

Specifications

Battery typeLi-Polymer
Voltage3.7V
Capacity4000mAh
Wh14.8Wh
Dimensions76.50 x 57.00 x 7.00mm
Weight
Connector
ChemistryLi-Polymer

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.