Free U.S. shipping

Compatible with Baofeng

Baofeng UV-82 Replacement Battery - Replaces BL-8

$25.65In stock

Why this battery

  • Fits Baofeng UV-82, UV-8R, UV-82X, UV-82C and replaces OEM battery BL-8.
  • Voltage 7.4V and 1300mAh capacity sustains full transmit power on VHF/UHF bands throughout your shift.
  • Connector slides into radio housing with positive terminal forward; locking tab seats flush against battery compartment wall.
  • We bench tested this cell with a Baofeng programming cable at full PTT duty cycle; BMS accepted charge without fault codes.
  • If the charger dock shows a fault LED on first insertion, remove the battery, wipe the gold contact strip with a dry cloth, and reseat firmly — the Baofeng platform requires a clean contact cycle to accept the new BMS handshake before charging begins.
7.4V1300mAhLi-ion

Fits 9 models · Replaces 1 part number

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$25.65Quantity 1

About this replacement

Baofeng UV-82 Series — 7.4V Li-ion Replacement Battery (BL-8)

This is a 7.4V, 1300mAh Li-ion replacement for the Baofeng BL-8 pack. It fits the UV-82, UV-8R, UV-82X, and UV-82C handhelds, along with five additional UV-82 platform variants. Voltage and connector match the original specification exactly.

  • UV-82 platform compatibility: Every model in this list shares the same dual-PTT architecture, 7.4V voltage rail, and BL-8 form factor. The battery bay latch, contact pin layout, and BMS handshake protocol are identical across UV-82, UV-8R, UV-82X, and UV-82C — one pack covers the whole family.
  • Bench tested on actual hardware: We cycled this pack on a UV-82 through repeated PTT keying sequences. The BMS held the output rail steady through transmit current spikes and tripped correctly at the low-voltage cutoff threshold without locking the radio out.
  • First-insertion contact check: If the charger shows a fault indicator on first insertion, remove the pack, wipe the three gold contact pads on the battery base with a dry cloth, and reseat firmly. The UV-82 charger dock requires a clean contact cycle to complete the BMS handshake before charging starts.

Why the UV-82 cuts out mid-transmission on a new BL-8

A new Li-ion cell ships at storage voltage — typically 3.6–3.75V per cell, not full charge. On the UV-82, the BMS monitors cell voltage under the transmit load spike. If the resting voltage is low enough, that spike can pull the cell below the BMS cutoff threshold, dropping the radio mid-key. This is not a faulty pack. Charge the battery fully before the first transmission session and the cutout stops.

Bar indicator reads one fewer bar than expected after swap

The UV-82 uses a simple voltage-threshold bar display — it reads the cell voltage and maps it to a bar level. A new pack at storage voltage will show two or three bars, not four. This is accurate — the cell is not fully charged yet. After a complete charge cycle, the pack should read at or above 8.2V at rest, and the indicator will show full bars.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Baofeng
Fit Model
UV-82UV-8RUV-82XUV-82CUV-98DUV-8DUV-Q5UV-82LUV-82HP
Part Number
BL-8

Specifications

Battery typeLi-ion
Voltage7.4V
Capacity1300mAh
Wh9.62Wh
Dimensions108.88 x 51.50 x 16.00mm
Weight
Connector
ChemistryLi-ion

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.