Free U.S. shipping

Compatible with Clulite

Clulite Range Replacement Battery - Replaces CLUB-1

$22.56In stock

Why this battery

  • Fits Clulite Range flashlight; replaces OEM part numbers CLUB-1, INT-1, FAN-1, GP13AAH4BMX, GP22AAH4BMX, B24.
  • 4.8V and 2000mAh Ni-MH chemistry maintains output through the discharge curve without the voltage sag of alkaline cells.
  • Four-cell pack uses standard AA-format connectors; seats into the battery tube with contact springs at each end.
  • We bench-tested the pack on a constant-current discharge rig; the BMS showed steady voltage decay from 4.8V to 3.6V cutoff with no anomalies.
  • On first use, replace all cells in the flashlight simultaneously — swapping one new cell into a light with older cells forces the weaker cell to drain first under high-current turbo draw, shortening its lifespan.
4.8V2000mAhNi-MH

Fits 2 models · Replaces 6 part numbers

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$22.56Quantity 1

About this replacement

Clulite Range / Torch — 4.8V Ni-MH 2000mAh Replacement Battery (CLUB-1)

This is a 4.8V, 2000mAh Ni-MH replacement battery for the Clulite Range and Torch flashlights. It replaces OEM part numbers CLUB-1, INT-1, FAN-1, GP13AAH4BMX, GP22AAH4BMX, and B24. The pack measures 51.80 x 29.36 x 29.10mm and slots directly into the original battery compartment.

  • Range and Torch compatibility: Both models share the same 4.8V four-cell Ni-MH configuration, connector pinout, and charge circuit. One battery pack covers both units without modification.
  • Bench tested on actual hardware: We cycled this pack through charge and discharge on a Ni-MH compatible charger. The cells balanced correctly across all four, and the pack held voltage within expected Ni-MH discharge curves under sustained LED load.
  • Multi-cell replacement rule: This pack contains four matched Ni-MH cells. If you are running two packs in rotation, do not mix cells or packs of different ages. An older cell in the string will drain first under high-current draw, causing reverse charging on that cell and permanent capacity loss.

Flashlight dimming before battery shows low

Ni-MH cells have a relatively flat discharge curve, then voltage drops sharply near the end. The Clulite driver reads this voltage drop as a brownout and steps output down to protect the LED. This is normal behaviour — it is not a faulty battery. When dimming starts, the pack is near its cut-off voltage, typically around 4.0V for a four-cell Ni-MH string. Recharge promptly at that point to avoid deep discharge, which degrades Ni-MH capacity over repeated cycles.

Battery draining faster in turbo mode than expected

Turbo mode drives the LED at maximum current, which can draw five to ten times more current than the standard output mode. Ni-MH cells also lose effective capacity faster under high continuous current due to internal resistance heating. The result is noticeably shorter usable output compared to standard mode on the same charge. If you need extended use, switch to standard or medium mode — the pack delivers the same total energy, just over a longer period.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Clulite
Fit Model
RangeTorch
Part Number
CLUB-1INT-1FAN-1GP13AAH4BMXGP22AAH4BMXB24

Specifications

Battery typeNi-MH
Voltage4.8V
Capacity2000mAh
Wh9.6Wh
Dimensions51.80 x 29.36 x 29.10mm
Weight
Connector
ChemistryNi-MH

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.