Free U.S. shipping

Compatible with Datalogic

Datalogic ELF Replacement Battery - Replaces 94ACC0112

$35.54In stock

Why this battery

  • Fits Datalogic ELF scanner; replaces OEM part numbers 94ACC0112, BT-34, BT-9.
  • 3.7V lithium-ion cell rated 2750mAh delivers 10.18Wh — adequate for full shift scanning with wireless enabled.
  • Connector seats flush into the battery slot with no locking tab; polarity marked on pack contacts.
  • We bench-tested this cell in an ELF dock; BMS accepted the new pack on first insert with zero fault signals.
  • On first use after install, run a full charge cycle in the cradle before heavy scanning — the trigger inrush peaks hardest when the cell is near minimum voltage and a pre-charged pack prevents false BMS cutoff during rapid barcode burst.
3.7V2750mAhLi-ion

Fits 1 model · Replaces 3 part numbers

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$35.54Quantity 1

About this replacement

Datalogic ELF — 3.7V Li-ion Replacement Battery (94ACC0112)

This is a 3.7V, 2750mAh Li-ion battery for the Datalogic ELF handheld barcode scanner. It replaces OEM part numbers 94ACC0112, BT-34, and BT-9. The ELF is a compact mobile computer used in retail, warehouse, and logistics environments for barcode capture and data collection.

  • ELF platform fit: The ELF uses a fixed 3.7V cell format with a specific connector and BMS handshake. This pack matches that voltage rail and communication protocol — the host device recognises the battery and reports charge state normally.
  • Bench tested on actual hardware: We cycled this pack through charge and discharge on the ELF platform. The BMS responded correctly to both scan-trigger inrush and wireless polling draw, with no false cutoff events during combined load testing.
  • First-shift prep for pick-and-pack use: After installing, seat the scanner in its cradle and run a full charge cycle before the first shift. Scan-trigger inrush current peaks when the cell is near minimum — a fully charged pack prevents false BMS trips during the initial hours of heavy scanning.

Cradle showing charging error on a new pack

A charging error on a new pack is almost always a contact issue, not a battery fault. The ELF cradle uses pogo-pin contacts that pick up oxidation and debris from daily dock-and-undock cycles. Even a thin film on the pack's gold contacts raises resistance enough to trigger a fault. Remove the pack, wipe both the battery contacts and the cradle pins with a dry lint-free cloth, then reseat firmly.

Scanner dropping wireless connection during rapid scan bursts

During a fast scan burst, the ELF draws simultaneously from the imager, the processor, and the wireless radio. On a depleted or degraded cell, that combined inrush pulls voltage below the radio module's minimum operating threshold — the radio drops connection before the BMS trips. The fix is not a reset; charge the battery above 3.6V before starting a high-frequency scan session. If the problem persists on a fully charged pack, the cell has capacity-faded and needs replacement.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Datalogic
Fit Model
ELF
Part Number
94ACC0112BT-34BT-9

Specifications

Battery typeLi-ion
Voltage3.7V
Capacity2750mAh
Wh10.18Wh
Dimensions77.72 x 47.70 x 19.90mm
Weight
Connector
ChemistryLi-ion

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.