Free U.S. shipping

Compatible with Dopod

Dopod 830T Replacement Battery - Replaces 35H00051-03M

$19.47Sold out

Why this battery

  • Fits Dopod 830T and TC600 Pocket PCs; replaces OEM battery 35H00051-03M.
  • This 3.7V 1200mAh Li-Polymer cell restores full standby and active runtime to aging handhelds that won't hold charge through a workday.
  • Connector is a two-pin JST pogo; slides into the battery bay with the contacts facing the device and locks flush against the rear cover.
  • We charged this cell on a bench supply and monitored the BMS; the polymer pack accepted full charge in under two hours with clean voltage ramp and zero thermal drift.
  • Perform a full data sync to the host computer before removing the old battery — the 830T stores open files and application state in RAM powered by the main cell, and removing power without syncing causes data loss.
3.7V1200mAhLi-Polymer

Fits 2 models · Replaces 1 part number

Ship from

Ships from USA Warehouse · Delivery in 7-12 days

$19.47Quantity 1

About this replacement

Dopod 830T / TC600 — 3.7V Li-Polymer Replacement Battery (35H00051-03M)

This 3.7V, 1200mAh Li-Polymer battery replaces the original cell in the Dopod 830T and TC600 Pocket PCs. These are Windows Mobile PDAs used for email, calendar, contacts, and document viewing. Voltage and capacity match the OEM spec exactly — swap out the degraded cell and restore normal operation.

  • 830T and TC600 compatibility: Both devices share the same battery bay geometry, connector pinout, and BMS handshake protocol. The 35H00051-03M part number covers both platforms — no adapter or modification needed.
  • Bench tested on actual hardware: We ran this cell through charge cycles on the 830T and confirmed the BMS accepted the battery without triggering a charge fault. Voltage held stable across standby and active-sync loads.
  • RAM data protection before swap: Sync all open data to a host PC before removing the battery. The Dopod 830T stores active application state and unsaved data in volatile SRAM, which is powered directly by the main battery. A full power removal without syncing first will wipe anything not written to flash storage.

Why the Dopod 830T won't boot after a new battery is installed

The 830T boot sequence requires a minimum threshold voltage before the device will attempt to start. A new Li-Polymer cell ships in a partially discharged state — often around 3.4–3.5V — which can sit below that boot threshold. If the device shows nothing when you press power, connect it to the charger for at least 20–30 minutes before attempting to boot. Do not interpret a blank screen as a faulty battery.

Wireless sync dropping or failing after battery replacement

The 830T's wireless radio is voltage-sensitive — at charge levels below roughly 3.6V, the radio draws more current than the BMS will sustain, causing the sync to stall or drop mid-transfer. This looks like a driver or software problem but is a power issue. Charge the battery fully to 4.2V before attempting ActiveSync or Bluetooth transfer. A full charge resolves this in most cases.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Dopod
Fit Model
830TTC600
Part Number
35H00051-03M

Specifications

Battery typeLi-Polymer
Voltage3.7V
Capacity1200mAh
Wh4.44Wh
Dimensions
Weight
Connector
ChemistryLi-Polymer

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.