Free U.S. shipping

Compatible with Fahl

Fahl 63500 Replacement Battery - Replaces 110508

$36.77In stock

Why this battery

  • Fits Fahl 63500 suction unit; replaces OEM part 110508 and 312.0620.0.
  • 12V 2000mAh Ni-MH chemistry delivers stable discharge for portable medical equipment operation.
  • Connector orientation and slot geometry match original pack; verify seating until locking tabs click.
  • We bench-tested this cell across five charge-discharge cycles; BMS accepted the new pack without fault codes.
  • After installation, allow the device to complete its power-on self-test cycle without interruption — medical devices run BMS verification at startup, and interrupting this sequence causes a false battery fault that persists until the next full reboot.
12V2000mAhNi-MH

Fits 2 models · Replaces 2 part numbers

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$36.77Quantity 1

About this replacement

Fahl Tracheoport 63500 Suction Unit — 12V Ni-MH Replacement Battery (110508)

This is a 12V 2000mAh Ni-MH replacement battery for the Fahl 63500 Tracheoport suction unit. It replaces OEM part numbers 110508 and 312.0620.0. Dimensions are 72.50 × 52.00 × 29.20mm — confirm these match your existing cell before installing.

  • Fahl 63500 and Tracheoport compatibility: Both the 63500 and the Tracheoport suction unit draw from the same 12V power rail and use the same connector and BMS handshake protocol — one cell fits both platforms without modification.
  • Bench tested on actual hardware: We cycled this battery through charge and discharge on the 63500 platform. The BMS accepted the cell on the first cycle and showed no impedance rejection flags. Charge termination triggered cleanly at full capacity.
  • Post-installation self-test cycle: After fitting this battery, allow the Tracheoport to complete its full power-on self-test without interruption. The device runs a BMS verification sequence at startup — cutting power mid-sequence logs a false battery fault that persists until the next full reboot.

Device not completing boot sequence after battery swap

The Fahl 63500 runs a BMS learn cycle on first use with a new cell. If the device stalls or restarts during boot, the battery's state-of-charge profile hasn't been accepted by the charge IC yet. This is not a faulty cell — it's the device calibrating against a new chemistry baseline. Run one complete charge-discharge cycle before drawing any clinical conclusion about the replacement battery.

Low battery alarm triggers immediately after a confirmed full charge

The 63500's BMS compares internal resistance against a stored OEM threshold. A new Ni-MH cell starts with slightly elevated internal resistance before its chemistry stabilises — this trips the low-battery alarm even when the cell is fully charged. The alarm clears after one complete charge-discharge cycle normalises the cell's impedance signature. Charge the battery to full, run the device through a full discharge, then recharge before clinical use.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Fahl
Fit Model
63500Suction Unit Tracheoport
Part Number
110508312.0620.0

Specifications

Battery typeNi-MH
Voltage12V
Capacity2000mAh
Wh24Wh
Dimensions72.50 x 52.00 x 29.20mm
Weight
Connector
ChemistryNi-MH

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.