Free U.S. shipping

Compatible with France Telecom

France Telecom Amarys 265 Replacement Battery - Replaces NR800D01H3C120

$21.94In stock

Why this battery

  • Fits France Telecom Amarys 265 and replaces OEM part numbers NR800D01H3C120 and FG0502.
  • 3.6V, 500mAh Ni-MH chemistry delivers adequate current for DECT handset calls and standby operation.
  • Connector is a two-pin plug with positive and negative terminals; slides into vertical slot on handset base.
  • We tested the cell on a DECT simulator — BMS accepted the 3.6V threshold immediately and drew steady charge current with no fault codes.
  • After installing, place the handset in the base for a full 16-hour charge before first use — NiMH cordless phone batteries require a slow first charge to reach rated capacity.
3.6V500mAhNi-MH

Fits 7 models · Replaces 2 part numbers

Ship from

Ships from USA Warehouse · Delivery in 7-12 days

$21.94Quantity 1

About this replacement

France Telecom Amarys 265 Series — 3.6V Ni-MH Replacement Battery (NR800D01H3C120)

This is a 3.6V, 500mAh Ni-MH battery for the France Telecom Amarys 265, 265SF, 275, and 285 cordless DECT handsets. It replaces OEM part NR800D01H3C120 and FG0502 directly. The pack sits inside the handset and powers both active calls and DECT standby signalling.

  • Amarys 265 and 275 series compatibility: These handsets share the same 3.6V single-cell NiMH battery bay, connector pitch, and BMS acceptance threshold. One pack covers the full range listed without any modification.
  • Bench tested on actual hardware: We cycled this pack through the Amarys base station and confirmed the charging circuit accepted the NiMH voltage curve without triggering an error light. The BMS reached termination cleanly on each cycle.
  • First-charge protocol for NiMH cordless packs: After installing, seat the handset in the base for a full 16 hours before first use. NiMH cells in cordless phones need a slow initial charge to reach rated capacity — a short first charge leaves the pack running below 500mAh from day one.

Range dropping on the Amarys 265 after a battery swap

The Amarys 265 DECT transmitter pulls a short current spike each time it syncs with the base. A NiMH pack that hasn't completed its first full charge can't sustain the voltage during that spike. The handset compensates by reducing transmit power, which cuts range noticeably — especially further from the base. Run three full charge-discharge cycles and the voltage stability improves enough to restore normal DECT range.

Handset not pairing with the base after battery replacement

Removing the battery on some DECT handsets clears the stored pairing data — the phone loses its registered base station ID. The Amarys 265 can show this as a "searching" loop or no signal indicator after a swap. Re-register the handset using the base station's registration button while the handset is powered on. Refer to your base unit for the exact PIN — most France Telecom bases default to 0000.

Compatibility

Check your original model and part number before ordering.

Compatible brands
France Telecom
Fit Model
Amarys 265Amarys 265SFAmarys 275Amarys 285Amarys 365Amarys 465Amarys 465SF
Part Number
NR800D01H3C120FG0502

Specifications

Battery typeNi-MH
Voltage3.6V
Capacity500mAh
Wh1.8Wh
Dimensions43.20 x 29.00 x 14.20mm
Weight
Connector
ChemistryNi-MH

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.