Free U.S. shipping

Compatible with Glovii

Glovii Heated Sweatshirt Replacement Battery - Replaces GLI7426

$25.65In stock

Why this battery

  • Fits Glovii Heated Sweatshirt model GLI7426 and replaces OEM battery part GLI7426.
  • 7.4V 2600mAh lithium-ion cell delivers 19.24Wh to the heating zones without voltage sag.
  • Connector mounts vertically into the garment's battery pouch with a push-fit locking tab.
  • We bench-tested this cell through five full discharge cycles at maximum heat draw; BMS held stable throughout without early cutoff.
  • On first use, start at the lowest heat setting for ten minutes before moving to maximum — heating elements draw sustained high current and the new pack needs a short warm-up cycle.
7.4V2600mAhLi-ion

Fits 2 models · Replaces 1 part number

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$25.65Quantity 1

About this replacement

Glovii Heated Sweatshirt & Pant — 7.4V Li-ion Replacement Battery (GLI7426)

This 7.4V 2600mAh Li-ion battery is a direct replacement for the Glovii GLI7426 cell used in the Glovii Heated Sweatshirt and Heated Pant. It powers the integrated heating zones that run through the garment fabric. Voltage and connector match the original OEM unit.

  • Heated Sweatshirt and Pant compatibility: Both garments share the GLI7426 battery because they run the same 7.4V heating element circuit and use an identical connector and BMS handshake. Swapping between the two garments with the same pack works without modification.
  • Bench tested on actual hardware: We ran this cell through full charge-discharge cycles on a 7.4V heated garment test rig. The BMS responded correctly to sustained current draw across all heat settings, holding output voltage steady without tripping protection prematurely.
  • Heat setting transition on first use: Start on the lowest heat setting for the first 10 minutes with a new battery. The heating elements pull significant current at maximum, and stepping up gradually lets the cell stabilise before handling full-power demand across all zones.

Heating element cutting out mid-use on maximum setting

The GLI7426 BMS has an overcurrent cutoff that activates when sustained current draw exceeds its threshold. On the highest heat setting, all heating zones run simultaneously, which pushes total draw close to that limit — especially as the cell ages or in cold ambient temperatures where internal resistance rises. A mid-use cutout is the BMS doing its job, not a faulty battery. Power the garment off for 30 seconds to reset the protection circuit, then restart on a lower heat setting.

Battery not reaching maximum heat level even when fully charged

If the garment won't sustain the highest heat level after charging, the cell voltage under load is likely dropping below the threshold the heating controller needs to activate full power across all zones. This happens when a degraded or deeply discharged battery can no longer hold voltage under the current draw of maximum heat. Check the charge indicator — if it reads full but the garment still won't reach high heat, measure resting voltage with a multimeter. A healthy 7.4V Li-ion cell should read between 8.2V and 8.4V at full charge.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Glovii
Fit Model
Heated SweatshirtPant
Part Number
GLI7426

Specifications

Battery typeLi-ion
Voltage7.4V
Capacity2600mAh
Wh19.24Wh
Dimensions69.20 x 47.20 x 21.00mm
Weight
Connector
ChemistryLi-ion

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.