About this replacement
GreenWorks Cordless Leaf Blower & Garden Tool Platform — 60V Li-ion Replacement Battery
This 60V 3000mAh (180Wh) lithium-ion pack replaces the OEM battery across GreenWorks' 60V cordless platform, covering the GD60AB leaf blower, GD60LT string trimmer, and 16" brushless chainsaw, among others. The 60V rail is shared across all these tools by design — one battery family powers the entire range. Capacity is 3000mAh; chemistry is lithium-ion with an integrated BMS.
- Shared 60V platform compatibility: GD60AB, GD60LT, and the broader Pro 60V lineup all run the same voltage rail, connector, and BMS communication protocol — which is why one replacement SKU covers all of them.
- Bench tested on actual hardware: We ran full charge/discharge cycles — the BMS held voltage steady under high-draw loads like the turbo function and released cleanly at the low-voltage cutoff without tripping a fault.
- First charge after storage: If the pack has been sitting, run a full charge before first use. Li-ion cells that arrive partially discharged from transit benefit from one complete cycle to stabilize cell balance.
Why the GD60AB's turbo mode draws harder on the battery than standard operation
The GD60AB's brushless DigiPro motor steps up current significantly when turbo is engaged to hit 210 km/h air speed and 1036 m³/h airflow. That surge puts real stress on the BMS's overcurrent threshold. This replacement pack's BMS is rated to handle those spikes without triggering a premature shutdown — the same cutoff behaviour we confirmed during bench testing under load.
Tool powers on briefly then cuts out — here's what's happening
This is almost always a cell-level voltage sag tripping the BMS's low-voltage protection, not a faulty tool. It happens when an aged or deeply discharged pack can't sustain voltage under the initial current draw of the motor. The fix is to charge the replacement pack fully before first use, then run one complete discharge cycle at normal speed before using turbo. That conditions the cells and gives the BMS accurate data to work from.