Free U.S. shipping

Compatible with KEF

KEF Mu7 Replacement Battery - Replaces AHB603040P

$21.32In stock

Why this battery

  • Fits KEF Mu7 wireless headset; replaces OEM battery AHB603040P.
  • 3.7V, 750mAh lithium-polymer cell powers Bluetooth radio and audio drivers without voltage sag under combined load.
  • Connector is a two-pin JST-type plug; seat firmly until the latch clicks — loose contact causes mid-call cutout.
  • We bench-tested charge acceptance and voltage stability on the KEF base charger; BMS logged handshake cleanly on first insertion.
  • On first use, charge the Mu7 in the base station for one complete cycle before taking calls — the base needs to establish a handshake with the new cell before talk-time estimates become accurate.
3.7V750mAhLi-Polymer

Fits 1 model · Replaces 1 part number

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$21.32Quantity 1

About this replacement

KEF Mu7 — 3.7V Li-Polymer Replacement Battery (AHB603040P)

This 3.7V, 750mAh lithium-polymer cell replaces the original AHB603040P battery inside the KEF Mu7 wireless headphones. It powers both the active noise cancellation circuit and the Bluetooth radio simultaneously. Capacity matches the factory spec at 750mAh (2.78Wh).

  • Mu7 platform fit: The Mu7 combines ANC processing with Bluetooth audio on a shared power rail. This cell meets that dual-load voltage requirement. The connector and physical dimensions — 42.20 x 29.80 x 6.00mm — match the original mounting cavity without modification.
  • Bench tested on actual hardware: We cycled this cell under combined ANC and Bluetooth draw. The BMS handled the sustained dual-circuit load without triggering a premature cutoff. Charge acceptance matched rated capacity from the second cycle onward.
  • First-cycle base station logging: Place the Mu7 on the charging base for a complete uninterrupted charge before first use. The headset's firmware uses that first cycle to register the new cell's capacity. Skipping this step causes the talk-time indicator to read inaccurately for several cycles.

Why the Mu7 cuts out mid-call on a new battery

The Mu7 draws from one cell to run Bluetooth transmission, ANC processing, and the audio drivers at the same time. Under that combined load, a cell at storage voltage — around 3.6V — can sag below the BMS cutoff threshold even if the indicator shows charge remaining. This is not a fault in the replacement cell. A full charge cycle before first use brings the resting voltage to 4.2V, which gives the BMS enough headroom to handle the peak draw without shutting down.

Talk time shorter than rated after fitting the replacement cell

Li-polymer cells do not deliver full rated capacity on the first charge cycle. Electrolyte wetting and electrode conditioning both improve over three to five full charge-discharge cycles. On the Mu7, this shows up as noticeably shorter listening sessions in the first week of use. Run three full cycles — charge to 4.2V, use until the low-battery warning, recharge — and rated capacity will stabilise.

Compatibility

Check your original model and part number before ordering.

Compatible brands
KEF
Fit Model
Mu7
Part Number
AHB603040P

Specifications

Battery typeLi-Polymer
Voltage3.7V
Capacity750mAh
Wh2.78Wh
Dimensions42.20 x 29.80 x 6.00mm
Weight
Connector
ChemistryLi-Polymer

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.