Free U.S. shipping

Compatible with Kress

Kress Mission Replacement Battery - Replaces 59003453

$32.45In stock

Why this battery

  • Fits Kress Mission KR100 Nano, KR101E Nano, and Nano 600 mowers; replaces OEM part 59003453.
  • 20V 2500mAh Li-ion cell delivers 50Wh for consistent blade motor power across seasonal cutting cycles.
  • Connector slides straight into the Mission battery slot with a quarter-turn locking tab; no adapter needed.
  • We bench-tested this pack on a KR101E under full-load blade engagement — BMS held stable through thick-grass cutoff scenarios with no nuisance trips.
  • Before first spring use, bring the battery indoors overnight if outdoor temperatures are below 10°C; cold cells trigger blade motor inrush current that can trip the BMS cutoff prematurely.
20V2500mAhLi-ion

Fits 5 models · Replaces 2 part numbers

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$32.45Quantity 1

About this replacement

Kress Mission Series — 20V Li-ion Replacement Battery (59003453)

This 20V 2500mAh Li-ion battery replaces the original pack on Kress Mission cordless lawn mowers, including the Mission KR100 Nano, Mission KR101E Nano, and Mission Nano 600 KR101E. It matches the OEM voltage rail and connector used across the Mission platform. Capacity is 2500mAh (50Wh) — same as the factory spec.

  • Mission platform fit: These models share a common 20V battery interface, BMS handshake protocol, and connector housing. A single battery spec covers the full Mission range because Kress standardised the 20V cell configuration across this lineup.
  • Bench tested on actual hardware: We ran this pack through charge cycles and simulated blade-motor inrush loads. The BMS held cutoff thresholds consistent with the OEM pack and did not trip under normal starting current.
  • Seasonal storage tip: Before the first mow of spring, bring the battery indoors overnight if temperatures are below 10°C. Cold Li-ion cells carry higher internal resistance, and the blade motor's inrush current can trip the BMS on a pack that hasn't warmed to room temperature.

BMS cutoff on thick-grass or wet-grass blade load

The Mission mower's blade motor draws a short burst of high current every time it bites into dense or wet grass. If that inrush current spike exceeds the BMS protection threshold, the pack disconnects to protect the cells. This shows up as the mower cutting out suddenly mid-row, then restarting after a few seconds once the BMS resets. Keeping blade speed consistent and avoiding very heavy passes reduces the peak draw and prevents nuisance trips.

Charger showing a fault light after the pack sat all winter

Li-ion cells self-discharge slowly during storage. A pack left in a garage from autumn to spring can drop below the charger's minimum acceptance voltage — typically around 2.5V per cell. When that happens, the charger sees an out-of-range voltage and throws a fault instead of starting a charge cycle. Place the pack in a warm room for an hour, then retry the charger; if the cells haven't dropped too far, the charger will re-accept the pack and begin a recovery charge.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Kress
Fit Model
MissionMission KR100 NanoMission KR101E NanoMission Nano 600 KR101EMission Nano 600KR101E
Part Number
59003453KA3022

Specifications

Battery typeLi-ion
Voltage20V
Capacity2500mAh
Wh50Wh
Dimensions95.00 x 68.50 x 24.70mm
Weight
Connector
ChemistryLi-ion

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.