Free U.S. shipping

Compatible with KURIO

KURIO 7S Replacement Battery - Replaces PL458097

$27.50In stock

Why this battery

  • Fits Kurio 7S and C1300 tablets; replaces OEM battery PL458097.
  • 3.7V and 4000mAh capacity restores full charge cycles on tablets that shut down prematurely or show depleted fuel gauge after years of use.
  • Connector is a two-pin JST-style plug with keyed orientation; tabs lock into the housing slot without tools or adhesive.
  • We bench-tested the cell against the original Kurio fuel gauge IC — BMS accepted handshake on first insertion, voltage curve stable through full discharge.
  • Run one complete discharge to automatic shutoff, then charge uninterrupted to 100% to recalibrate the fuel gauge IC against the new cell and fix inaccurate percentage display.
3.7V4000mAhLi-Polymer

Fits 2 models · Replaces 1 part number

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$27.50Quantity 1

About this replacement

KURIO 7S / C1300 — 3.7V Li-Polymer Replacement Battery (PL458097)

This is a 3.7V, 4000mAh Li-Polymer battery for the KURIO 7S and C1300 kids' tablets. It replaces part number PL458097 when the original cell no longer holds a usable charge. Dimensions are 99.15 × 79.55 × 4.20 mm — measure your existing cell before ordering to confirm fitment.

  • 7S and C1300 compatibility: Both tablets share the same mainboard revision and battery bay dimensions, so a single cell covers both. The connector pinout and BMS handshake are identical across the two models.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on a KURIO mainboard. The BMS accepted the new cell without fault codes, and the charge IC reached full termination voltage cleanly.
  • Fuel gauge reset after swap: After fitting this battery, run the tablet down to automatic shutoff once, then charge uninterrupted to 100%. This recalibrates the fuel gauge IC against the new cell's actual capacity curve and clears the inaccurate percentage readings that typically appear straight after a swap.

Tablet shutting down at 15–25% after battery replacement

This is a fuel gauge calibration problem, not a faulty cell. The fuel gauge IC was trained on the old cell's discharge curve. When voltage drops under combined display and WiFi load, it hits what looks like an empty-battery floor while real capacity still exists. Run one complete discharge to automatic shutoff, then a full uninterrupted charge to 100%. After that cycle, the IC remaps its low-voltage threshold to the new cell and the phantom shutdowns stop.

KURIO tablet showing wrong battery percentage after swap

The percentage is calculated by a fuel gauge IC on the board, not the battery itself. That IC stored the old cell's capacity data and is now reading the new cell's voltage incorrectly. A single full discharge-to-shutoff followed by a full charge to 100% forces the IC to relearn the new cell's voltage-to-capacity relationship. After that cycle, percentage readings stabilise and track normally.

Compatibility

Check your original model and part number before ordering.

Compatible brands
KURIO
Fit Model
7SC1300
Part Number
PL458097

Specifications

Battery typeLi-Polymer
Voltage3.7V
Capacity4000mAh
Wh14.8Wh
Dimensions99.15 x 79.55 x 4.20 mm
Weight
Connector
ChemistryLi-Polymer

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.