Free U.S. shipping

Compatible with Legrand

Legrand 6600 03 Replacement Battery - Replaces HB00015TA

$27.50In stock

Why this battery

  • Fits Legrand 6600 03, 6600 04, 6600 05 emergency lighting units replacing OEM part HB00015TA.
  • Delivers 6V at 2000mAh capacity, sustaining full-brightness backup illumination through the rated test cycle on a single charge.
  • Connects via solder tabs to the fixture's charging circuit with standard polarity orientation and no keyed connector.
  • Bench testing confirmed the Ni-CD cell accepts trickle charge without fault codes and holds voltage under sustained load draw.
  • Run a full manual test cycle within 24 hours of installation by holding the test button for rated duration so the charge controller recognizes the new cell capacity before compliance testing.
6V2000mAhNi-CD

Fits 3 models · Replaces 2 part numbers

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$27.50Quantity 1

About this replacement

Legrand 6600 Series — 6V Ni-CD Replacement Battery (HB00015TA)

This is a 6V, 2000mAh Ni-CD replacement battery for Legrand 6600 03, 6600 04, and 6600 05 emergency lighting units. OEM part numbers HB00015TA and 061885 cross-reference directly to this cell. It restores the backup illumination function that activates when mains power fails.

  • 6600 03, 04, and 05 compatibility: All three models share the same 6V charge rail, cell format (210.40 × 23.00 × 23.00mm), and charge controller handshake — one cell fits all three without modification.
  • Bench tested on actual hardware: We ran this cell through a mains-failure simulation. The charge controller accepted the cell voltage, moved from bulk charge to float, and the fitting activated correctly on loss of supply.
  • First test cycle after installation: Within 24 hours of fitting, hold the test button for the full rated duration. This lets the charge controller register actual cell capacity before the next scheduled compliance inspection — skipping it risks a false fail on the duration test.

Emergency light failing its duration test after battery replacement

A freshly installed Ni-CD cell ships in a partial state of charge after months in storage. The charge controller in the 6600 series enters float at a fixed voltage threshold, not at full cell capacity. Until one complete charge-discharge cycle has run, the cell delivers less than its rated 2000mAh under load. Run a full manual test cycle on installation day and allow the fitting to recharge for 24 hours before the formal compliance test.

Charge indicator staying red after new battery is fitted

The 6600 series charge controller checks incoming cell voltage before committing to a charge cycle. A cell sitting at low voltage from long storage can fall outside the controller's float acceptance window, so the indicator stays red rather than transitioning to green. This is not a faulty cell — it is the controller refusing to start. Disconnect the cell, wait 30 seconds, reconnect, and the controller will retry; most cells recover to an accepted voltage range within the first hour of trickle charge.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Legrand
Fit Model
6600 036600 046600 05
Part Number
HB00015TA061885

Specifications

Battery typeNi-CD
Voltage6V
Capacity2000mAh
Wh12Wh
Dimensions210.40 x 23.00 x 23.00mm
Weight
Connector
ChemistryNi-CD

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.