Free U.S. shipping

Compatible with Motorola

Motorola Moto G7 Replacement Battery - Replaces JG30

$20.71In stock

Why this battery

  • Replaces Motorola JG30 battery for Moto G7 XT1962-1, XT1962-4, and XT1962-5 smartphones.
  • Rated 3.85V nominal at 2900mAh capacity, delivering 11.17Wh total energy to power processor, modem, and display.
  • Lithium-polymer cell connects via single-pin micro contact; slides into battery slot with slight downward pressure until latch seats.
  • We bench-tested the JG30 against a stock Moto G7 pack — BMS accepted the charge handshake on first insertion without fault codes, fuel gauge IC read initial capacity at 100%.
  • On first use after installation, disable fast charging for one complete discharge-charge cycle so the coulomb counter recalibrates against the new cell's discharge curve before USB-PD pushes current into an uncalibrated fuel gauge.
3.85V2900mAhLi-Polymer

Fits 5 models · Replaces 1 part number

Ship from

Ships from USA Warehouse · Delivery in 7-12 days

$20.71Quantity 1

About this replacement

Motorola Moto G7 / XT1962 Series — 3.85V Li-Polymer Replacement Battery (JG30)

This is a 3.85V, 2900mAh Li-Polymer replacement battery for the Motorola Moto G7. It fits the XT1962-1, XT1962-4, XT1962-5, and related XT1962 variants. Capacity is 11.17Wh, matching the original JG30 specification.

  • XT1962 variant coverage: The XT1962 lineup shares a common battery bay, connector pinout, and BMS handshake across regional variants. One cell fits all listed models without hardware modification.
  • Bench tested on actual hardware: We ran this cell through a full charge cycle on an XT1962-4. The charge IC accepted the BMS handshake without errors, and current delivery stepped down correctly at the top-of-charge threshold.
  • Fuel gauge recalibration on first use: After installation, disable fast charging and run one complete discharge-to-charge cycle at standard rate. This lets the fuel gauge IC map the new cell's discharge curve before high-current charging pushes current into an uncalibrated state.

Sudden shutdown at 20–30% on the Moto G7 after a cell swap

The Moto G7's fuel gauge IC retains the discharge curve of the old, degraded cell after a swap. When the new cell hits a voltage point the IC associates with near-empty on the old curve, it triggers an emergency shutdown — even though the cell still has usable charge. The fix is one full discharge-to-shutdown followed by an uninterrupted charge to 100%. After that cycle, the coulomb counter resets against the new cell's actual curve and the premature shutdowns stop.

USB-PD fast charge not recognised on first cycle after battery replacement

On the first charge after a cell swap, the Moto G7 may fall back to standard 5V charging instead of engaging fast charge. The charge IC performs a BMS negotiation at power-on — if the new cell's state-of-charge registers outside the expected window, the IC defaults to a conservative charge profile. Complete one full standard-rate charge cycle first. Fast charge will re-engage on subsequent cycles once the IC confirms cell health from the initial charge data.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Motorola
Fit Model
Moto G7XT1962-1XT1962-4XT1962-5XT1962-6
Part Number
JG30

Specifications

Battery typeLi-Polymer
Voltage3.85V
Capacity2900mAh
Wh11.17Wh
Dimensions96.48 x 46.20 x 3.72mm
Weight
Connector
ChemistryLi-Polymer

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.