Free U.S. shipping

Compatible with Philips

Philips PowerPro Aqua FC6400 Replacement Battery - Replaces 4ICR19/65

$27.50In stock

Why this battery

  • Fits Philips PowerPro Aqua FC6400 and replaces OEM battery pack 4ICR19/65.
  • 14.8V lithium-ion at 2200mAh delivers stable voltage across wet and dry cleaning cycles without mid-job sag.
  • Connects via flat blade terminals with positive contact pins — aligns straight into the battery slot until the locking tab seats.
  • Bench test showed BMS accepted load draw under sustained suction without early cutoff; voltage held steady through filter blockage simulation.
  • Do not leave this vacuum on the charging dock permanently — continuous dock charge causes capacity fade in Philips Li-ion packs; charge to full and remove.
14.8V2200mAhLi-ion

Fits 7 models · Replaces 1 part number

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$27.50Quantity 1

About this replacement

Philips PowerPro Aqua FC6400 Series — 14.8V Li-ion Replacement Battery (4ICR19/65)

This is a 14.8V, 2200mAh Li-ion battery pack for the Philips PowerPro Aqua FC6400 cordless wet and dry vacuum. It replaces OEM part number 4ICR19/65 and fits the FC6400, FC6400/01, FC6401/01, and related variants. Voltage, connector, and BMS handshake all match the original specification.

  • FC6400 series compatibility: The FC6400, FC6400/01, and FC6401/01 all share the same 14.8V battery bay, connector pinout, and BMS communication protocol. One battery pack covers the full range without adapter or modification.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the FC6400 platform. The BMS negotiated correctly with the charger, and the protection circuit responded to both over-discharge and thermal events without false trips.
  • Dock charging habit on the FC6400: Do not leave this vacuum on the charging dock continuously. The FC6400 dock does not terminate charge and switch to a true standby mode — trickle current continues and accelerates cell degradation. Charge fully, then remove it from the dock.

Suction dropping before the battery indicator reaches low

This happens when the motor is working harder than rated — usually a partially blocked filter forcing it to draw extra current. The battery voltage sags under that elevated load before the indicator registers a low charge state. The BMS reads the voltage drop as a near-empty pack and throttles output to protect the cells. Clean or replace the filter first; if suction restores immediately, the battery was not the cause.

Motor cuts out mid-run then recovers after a short pause

This is a BMS overcurrent trip, not a flat battery. Sustained restricted airflow — blocked filter, full dust bin, or a carpet blockage — drives motor current above the protection threshold. The BMS disconnects the output, the motor stops, and it resets once current demand drops. Clear the restriction, then check that resting voltage is above 14.0V before continuing use.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Philips
Fit Model
PowerPro Aqua FC6400FC6400/01FC6401/01FC6400FC6401FC6402FC6400/81
Part Number
4ICR19/65

Specifications

Battery typeLi-ion
Voltage14.8V
Capacity2200mAh
Wh32.56Wh
Dimensions66.50 x 57.00 x 40.00mm
Weight
Connector
ChemistryLi-ion

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.