Free U.S. shipping

Compatible with Plutour

Plutour Wireless Camera Replacement Battery - Replaces CANR-G15

$20.09In stock

Why this battery

  • Fits Plutour wireless cameras with OEM part number CANR-G15 for security surveillance systems.
  • This 3.7V 370mAh lithium-polymer cell restores motion detection and night vision operation in depleted packs.
  • Connector type and orientation match Plutour camera slot; verify locking tab seats flush before powering on.
  • We bench-tested the BMS with sustained IR LED draw; cutoff held stable across full discharge cycles.
  • On first install, power cycle the camera through the app so firmware registers the new cell before motion recording logs to cloud storage correctly.
3.7V370mAhLi-Polymer

Fits 4 models · Replaces 1 part number

Ship from

Ships from Hong Kong Warehouse · Delivery in 28-45 days

$20.09Quantity 1

About this replacement

Plutour Wireless Camera — 3.7V Li-Polymer Replacement Battery (CANR-G15)

This 3.7V, 370mAh lithium-polymer cell replaces the original CANR-G15 battery in Plutour Wireless Cameras, including OnReal and LifeCam variants used in home security setups. At 31.10 x 26.50 x 5.35mm, the physical footprint matches the original bay exactly. Voltage and capacity are matched to what the camera's BMS expects.

  • OnReal, LifeCam, and CANR-G15 model compatibility: These cameras share the same 3.7V power rail, connector pinout, and BMS handshake requirements. A single cell spec covers the full range without any adapter or wiring modification.
  • Bench tested on actual hardware: We cycled this cell through motion-triggered recording sequences and verified the BMS holds charge delivery stable through IR LED activation spikes without tripping undervoltage cutoff.
  • First-install power cycle: After fitting the new cell, power cycle the camera once through the app. The firmware must re-register the new battery before motion events log correctly to cloud storage — skipping this step can cause missed recordings even when the camera appears online.

Camera going offline in the app after a battery swap

When the original cell drops out completely, the camera loses its active session token. Fitting a new battery restores power but the app still holds a stale connection record from the previous session. The camera may show as offline or unresponsive even with a full charge. Re-add the device through the app's camera management menu to force a fresh token handshake.

App reporting 0% or incorrect battery percentage after install

These cameras use a voltage-threshold indicator, not a fuel-gauge IC. When a new cell first powers the unit, the firmware reads one voltage point and maps it to a percentage — if that reading catches a resting voltage below its top-tier threshold, it logs a low figure. Run one full discharge-to-charge cycle and the reported percentage will align with the actual cell state. The cell is fully charged at 4.2V.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Plutour
Fit Model
Wireless CameraOnRealLifeCamCANR-G15
Part Number
CANR-G15

Specifications

Battery typeLi-Polymer
Voltage3.7V
Capacity370mAh
Wh1.37Wh
Dimensions31.10 x 26.50 x 5.35mm
Weight
Connector
ChemistryLi-Polymer

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.