Free U.S. shipping

Compatible with Proscenic

Proscenic F16 Replacement Battery - Replaces B20-T

$26.88In stock

Why this battery

  • Fits Proscenic F16 cordless vacuum, replaces OEM part B20-T battery pack.
  • Supplies 11.1V and 2600mAh capacity, delivering sustained motor voltage under floor and upholstery cleaning loads.
  • Connector slides onto the dock terminal with flat orientation and seats flush against the motor housing latch.
  • We bench-tested this cell on F16 dock charge — BMS accepted the handshake without fault code and held voltage stable under sustained suction draw.
  • On first insertion, if the vacuum motor stutters during heavy carpet pass, remove the battery and reseat it fully — the F16 dock contact needs a clean cycle to recognize new cell firmware.
11.1V2600mAhLi-ion

Fits 1 model · Replaces 1 part number

Ship from

Ships from USA Warehouse · Delivery in 7-12 days

$26.88Quantity 1

About this replacement

Proscenic F16 — 11.1V Li-ion Replacement Battery (B20-T)

This is an 11.1V 2600mAh Li-ion replacement battery for the Proscenic F16 cordless stick vacuum. It replaces OEM part number B20-T directly. Capacity figures come from product data — 2600mAh, 28.86Wh.

  • F16 platform fit: The F16 uses an 11.1V three-cell Li-ion pack with the B20-T form factor. Voltage rail, cell count, and connector match the original — the vacuum's motor controller sees the same electrical signature it expects.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the F16 platform. The BMS handled charge termination cleanly at full voltage and engaged overcurrent protection correctly under simulated motor load spikes.
  • Dock charging habit on the F16: Do not leave the F16 sitting on its charging dock between uses. Continuous low-level trickle charging accelerates capacity fade on this cell chemistry. Charge to full, then remove the vacuum from the dock until the next use.

Cordless vacuum losing suction before the battery indicator reaches low

This is one of the most common complaints on the F16 — the suction feels weak well before the LED signals a low battery. The cause is usually a partially blocked filter forcing the motor to draw higher current than its rated load. The BMS reads the elevated draw and reduces output to stay within safe limits, which drops motor speed and suction. Clean or replace the filter first; if suction recovers, the battery is not the fault.

Motor cuts out mid-clean then recovers after a short pause

This points to a BMS overcurrent trip, not a failed battery. When suction is restricted — blocked nozzle, clogged filter, or heavy carpet fibres compacting at the intake — the motor labours and current draw spikes. The BMS shuts the output to protect the cells, then resets once the pack cools slightly. Clear the blockage and confirm filter airflow is unobstructed. If the fault persists on a clean filter, check that battery terminal voltage under load stays above 9V.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Proscenic
Fit Model
F16
Part Number
B20-T

Specifications

Battery typeLi-ion
Voltage11.1V
Capacity2600mAh
Wh28.86Wh
Dimensions69.70 x 35.00 x 34.60mm
Weight
Connector
ChemistryLi-ion

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.