Free U.S. shipping

Compatible with Redmi

Redmi 12 5G Replacement Battery - Replaces BM5R

$26.27Sold out

Why this battery

  • Fits Redmi 12 5G smartphone; replaces OEM part number BM5R.
  • 3.87V and 5000mAh capacity sustains the processor, modem, and display under standard and peak loads.
  • Connector type is standard for Redmi 12 5G; physical orientation and contact alignment match the factory cell slot.
  • We bench tested this Li-Polymer pack on a Redmi 12 5G motherboard; the BMS accepted the cell on first insertion with no fault codes or voltage cutoff errors.
  • On first use after installation, disable fast charging for one complete discharge-charge cycle — this lets the fuel gauge IC recalibrate against the new cell discharge curve before high-current charging.
3.87V5000mAhLi-Polymer

Fits 1 model · Replaces 1 part number

Ship from

Ships from USA Warehouse · Delivery in 7-12 days

$26.27Quantity 1

About this replacement

Redmi 12 5G — 3.87V Li-Polymer Replacement Battery (BM5R)

This is a 3.87V, 5000mAh Li-Polymer battery carrying OEM part number BM5R. It fits the Redmi 12 5G smartphone. It replaces the original cell when the phone no longer holds a full charge, shuts down unexpectedly, or fails to power on.

  • Redmi 12 5G fit: The BM5R uses the same connector pinout and physical footprint as the factory cell. The BMS communicates over the same data line the phone's charge IC expects, so the system accepts the cell without hardware modification.
  • Bench tested on actual hardware: We ran this cell through full charge and discharge cycles on the Redmi 12 5G. The BMS reported correct voltage thresholds at both ends of the curve, and the charge IC accepted USB-PD input without rejecting the session.
  • First-cycle fast charging: On first use after installation, disable fast charging and run one complete discharge-charge cycle at standard rate. This lets the phone's fuel gauge IC build an accurate discharge curve against the new cell before high-current fast charging pushes elevated current into an uncalibrated state.

Sudden shutdown at 20–30% on the Redmi 12 5G

This happens when the fuel gauge IC is still calibrated to the old cell's discharge curve. The phone reads 25% but the actual cell voltage has already dropped below what the modem and display need under load. The BMS triggers a protection cutoff before the OS gets a low-battery warning. One full discharge-to-shutdown followed by an uninterrupted charge to 100% forces the coulomb counter to reset against the new cell's actual curve.

USB-PD fast charge not accepted on the first cycle after replacement

After a cell swap, the charge IC sometimes declines the fast-charge handshake on the first session because the BMS on the new cell has not yet passed a full authentication cycle with the phone's PMIC. This is not a fault with the battery or the charger. Charge once at standard 5W, let the cycle complete fully, then reconnect the fast charger. The handshake succeeds reliably from the second cycle onward.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Redmi
Fit Model
12 5G
Part Number
BM5R

Specifications

Battery typeLi-Polymer
Voltage3.87V
Capacity5000mAh
Wh19.35Wh
Dimensions
Weight
Connector
ChemistryLi-Polymer

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.