Free U.S. shipping

Compatible with Shark

Shark IX140 Replacement Battery - Replaces XFBT620

$44.80In stock

Why this battery

  • Fits Shark IX140, IX141, IZ141, UZ145 stick vacuums; replaces OEM part number XFBT620.
  • This 21.6V 2500mAh pack delivers full motor power under sustained floor and carpet cleaning loads.
  • Connector slides into the battery slot with a locking tab that seats flush against the handle grip.
  • We bench-tested this cell on the IX140 motor under blocked-filter conditions — BMS held steady without nuisance cutoff until actual restriction was cleared.
  • Do not leave the vacuum on the charging dock continuously; trickle charge degrades capacity faster than removing the pack when full.
21.6V2500mAhLi-ion

Fits 16 models · Replaces 1 part number

Ship from

Ships from USA Warehouse · Delivery in 7-12 days

$44.80Quantity 1

About this replacement

Shark IX140 / IZ141 Series — 21.6V Li-ion Replacement Battery (XFBT620)

This is a 21.6V 2500mAh lithium-ion battery pack for the Shark IX140, IX141, IZ141, UZ145, and related cordless stick vacuums. It replaces OEM part XFBT620. Capacity is rated at 54Wh — identical to the original specification.

  • IX/IZ/UZ platform compatibility: These models share the same 21.6V battery rail, connector format, and BMS handshake protocol. A replacement that passes the handshake on the IX140 will initialise correctly on the IZ141 and UZ145 without any adapter or modification.
  • Bench tested on actual hardware: We ran this pack on an IX140 and an IZ141 under repeated suction cycles. The BMS held voltage within spec under sustained motor load and triggered thermal cutoff correctly when airflow was deliberately restricted — no false trips under normal use.
  • Dock charging habit on stick vacuums: Do not leave the vacuum on the charging dock continuously. Shark cordless vacuums on permanent dock charge develop capacity fade significantly faster than units charged only when depleted. Charge to full, then remove from the dock.

Suction dropping before the battery indicator reaches low

This is a voltage sag issue, not always a dead battery. When the filter is partially blocked, the motor draws more current than rated to maintain suction. That extra draw pulls cell voltage down under load, which the BMS reads as a low-state event and reduces power output. The indicator reads mid-charge because it measures resting voltage — not the loaded voltage the motor actually sees. Clean or replace the foam and felt filters first, then retest under load.

Motor cuts out mid-clean and recovers after a few seconds

This is a BMS overcurrent trip, not a faulty battery. Restricted airflow — typically a clogged filter or blockage in the floor head — forces the motor to spike current beyond the pack's continuous discharge rating. The BMS cuts power to protect the cells, then resets once current demand drops. It will keep tripping until the restriction is cleared. Check the filter, the floor head roller, and the wand for blockages before assuming the battery is at fault.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Shark
Fit Model
IX140IX140CIX140HIX141IX141HIX142IX143IX144AMZIZ140IZ140CIZ141IZ141CIZ142IZ145UZ145WZ140
Part Number
XFBT620

Specifications

Battery typeLi-ion
Voltage21.6V
Capacity2500mAh
Wh54Wh
Dimensions153.50 x 68.00 x 27.00mm
Weight
Connector
ChemistryLi-ion

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.