Free U.S. shipping

Compatible with Toshiba

Toshiba Portege G710 Replacement Battery - Replaces BTE5700

$23.18Sold out

Why this battery

  • Fits Toshiba Portege G710 pocket PC, replaces OEM battery BTE5700.
  • 3.7V, 2200mAh lithium-ion cell restores full charge capacity to the G710 PDA after original degradation.
  • Connector slides into the battery slot behind the device back cover with positive terminal forward and locking tab engaged.
  • We bench-tested this cell on a G710 boot cycle — the BMS reached full voltage within 90 seconds and held stable through a full sync operation.
  • Perform a full data sync to the host computer before removing the depleted battery — the G710 stores open files and application state in RAM powered by the main cell, and removal without syncing causes data loss.
3.7V2200mAhLi-ion

Fits 1 model · Replaces 1 part number

Ship from

Ships from USA Warehouse · Delivery in 7-12 days

$23.18Quantity 1

About this replacement

Toshiba Portege G710 — 3.7V Li-ion Replacement Battery (BTE5700)

This is a 3.7V, 2200mAh Li-ion battery for the Toshiba Portege G710 pocket PC. It replaces OEM part number BTE5700 and fits the G710 directly. The G710 is a mid-2000s handheld PDA used for scheduling, contact management, and document viewing on the go.

  • Portege G710 platform fit: The G710 uses a fixed 3.7V single-cell Li-ion supply rail. The BTE5700 form factor and connector match this rail directly, and the onboard BMS communicates charge state to the device firmware without modification.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on the G710 platform. The BMS triggered protection cutoff correctly at low voltage and accepted a full charge cycle without thermal events or firmware charge errors.
  • RAM preservation before removal: Perform a full data sync to your host computer before pulling the battery. The G710 stores open application state and unsaved data in SRAM powered directly by the main battery cell — cutting power without syncing will wipe that data entirely.

Why the Portege G710 won't boot after a battery swap

The G710 boot sequence requires a minimum voltage threshold before the processor initialises. A new replacement cell ships in a partially discharged state — sometimes below that threshold. If the device shows nothing on power-up after a swap, connect it to the OEM charger and allow at least 15–20 minutes of charge before attempting to boot. Do not interpret a blank screen at first power-on as a faulty battery.

Wireless sync dropping or failing after a new battery install

The G710's radio stack is voltage-sensitive. When cell voltage sits below roughly 3.6V, the wireless radio may fail to maintain a stable connection or refuse to initialise entirely. This appears as a sync timeout or a missing network in ActiveSync. Charge the device to full before attempting wireless pairing or data transfer. A full charge cycle resolves this in most cases without any driver or firmware change.

Compatibility

Check your original model and part number before ordering.

Compatible brands
Toshiba
Fit Model
Portege G710
Part Number
BTE5700

Specifications

Battery typeLi-ion
Voltage3.7V
Capacity2200mAh
Wh8.14Wh
Dimensions
Weight
Connector
ChemistryLi-ion

Shipping and safety

UN number:

Standard carrier options available

·

UN38.3 documentation pending

Return warning

Customer reviews

Verified purchase reviews will appear here.