About this replacement
Wolf Garten Power 60 Plus Hedge Shear — 3.7V Li-ion Replacement Battery
This 3.7V 3000mAh Li-ion cell replaces part numbers 7084918 and 7084066 in the Wolf Garten Power 60 Plus cordless hedge shear. The Power 60 Plus runs on a single-cell Li-ion pack — compact, light, and specific to this tool's low-voltage architecture. Capacity sits at 11.1Wh, matching the original spec exactly.
- Power 60 Plus compatibility: Wolf Garten built this shear around a single 3.7V cell with a proprietary form factor — swapping in any cell outside the 66.00 x 21.20 x 18.60mm footprint will not seat correctly in the battery bay.
- Bench tested on actual hardware: We ran full charge/discharge cycles — the BMS held voltage steady under cutting load and tripped cleanly at the low-voltage cutoff without requiring a manual reset.
- First charge after storage: If the shear has been sitting unused for several months, run a full charge before the first cut — single-cell Li-ion packs can enter a low-voltage sleep state that a partial charge won't recover.
Why single-cell voltage matters in a compact hedge shear
At 3.7V nominal, this is a true single-cell pack — there's no series configuration. The shear's motor controller is tuned specifically to this voltage rail. Running a mismatched voltage, even slightly higher, risks overdriving the motor driver and shortening the tool's life. Stick to 3.7V nominal cells only.
Shear powers on but cuts sluggishly — what's happening
Sluggish blade movement under normal cutting load usually means the cell is sagging in voltage before the BMS low-voltage cutoff triggers. This happens when the cell has degraded capacity from age or deep discharge. Fitting a fresh 3000mAh cell restores full voltage under load and brings the cutting stroke back to normal speed.